ടൈറ്റിൽ: AnjaliOldLipi; സൈസ് -20; ഡബിൾ ലൈൻ സ്പേസിങ്; പാരഗ്രാഫ് സ്പേസിങ്: പാരഗ്രാഫിന് മുൻപ് -1 ലൈൻ; പാരഗ്രാഫിന് ശേഷം -1 ലൈൻ; സെന്റർ

ചിത്തിര സുധ

സ്കൂൾ ഓഫ് CS/IT

ഇന്ത്യൻ ഇൻസ്റ്റിറ്റ്യൂട്ട് ഓഫ് ഇൻഫർമേഷൻ ടെക്നോളജി &മാനേജ്‌മന്റ്- കേരള

ടെക്നോപാർക്കിൽ , തിരുവനന്തപുരം , കേരളം ( ഇന്ത്യ )

ഇ -മെയിൽ : chithira@iiitmk.ac.in

ദിവ്യ എസ് വിദ്യാധരൻ

ഡിപ്പാർട്മെൻറ് ഓഫ് കമ്പ്യൂട്ടർ സയൻസ് & എഞ്ചിനീയറിംഗ്

കോളേജ് ഓഫ് എഞ്ചിനീയറിംഗ് ,തിരുവനന്തപുരം ,കേരളം (ഇന്ത്യ)

ഇ -മെയിൽ: divyas@gmail.com

രത്‌നച്ചുരുക്കം (Abstract)

An Abstract is required for every paper; it should briefly summarize the reason for the work, the main findings, and the conclusions of the study. Do not include artwork, tables, elaborate equations or references. The abstract text is to be in 12-point and single-spaced type.

Leave one blank line after the Abstract.

1. ആമുഖം(Introduction) (Heading Level-1)

These instructions provide the guidelines for preparing papers for Sathradarsini in Malayalam. Use this document as a template and as an instruction set. Your paper should be in the same format as this file. There is not any limitation in the number of pages.

The easiest way to do this is simply to download a template document from [template URL], and replace the content with your own material.

1.1 Normal or Body Text (Heading Level-2)

The heading for subsections should be in Times New Roman 12-point italic with initial letters capitalized. Please use a 12-point Times Roman or Times New Roman, single-spaced. Do not use double-spacing. Be sure your text is fully justified, that is, flush left and flush right and the spacing between paragraphs should be 0.5 line.

1.1.1 Sub-subsections (Heading Level-3)

The heading for sub-subsections should be in Times New Roman 12-point with initial letters capitalized.

1.1.2 Sub-subsections (Heading Level-3)

The heading for sub-subsections should be in Times New Roman 12-point with initial letters capitalized.

1.2 Page size (Heading Level-2)

Set your page as A4, width 210 mm., height 297 mm. and all of their margins should be of 2.54 cm (1 inch). All printed material, including text, illustrations, and charts, must be kept within this print area.

2. ചിത്രങ്ങൾ ,പട്ടികകൾ ,മറ്റു ഘടകങ്ങൾ(Figures,Tables & Additional Elements) (Heading Level-1)

Figures, schemes, equations and charts should be referenced and explained in the text before they appears. The figure should be high quality, 300 dpi at least is required. Also they should be inserted into text and numbered.

2.1 Figures (Heading Level-2)

Figure Labels: Use 12 point Times New Roman for Figure labels. Use words rather than symbols or abbreviations when writing Figure axis labels to avoid confusing the reader.

Use the abbreviation “Fig. 1”, even at the beginning of a sentence in order to index them, in the text.

Figure 1. Description or brief title for the above figure.

2.2 Tables (Heading Level-2)

Use “Table 1” in order to index them in the text. Do not abbreviate “Table”.

Table 1. Description or brief title for the following table.

Table Head	Table Column Head
Table column subhead	Subhead	Subhead

2.3 Equations (Heading Level-2)

The equations are an exception to the prescribed specifications of this template. You will need to determine whether or not your equation should be typed using either the Times New Roman or the Symbol font (please no other font). If you are using Word, use either the Microsoft Equation Editor or the MathType add-on for equations in your paper (Insert | Object | Create New | Microsoft Equation or MathType Equation).

Number equations consecutively with equation numbers in parentheses flush with the right margin, as in (1). First use the equation editor to create the equation. Then select the "Equation" markup style. Press the tab key and write the equation number in parentheses.

(1)

Note that the equation is centered using a center tab stop. Be sure that the symbols in your equation have been defined before or immediately following the equation. Use “(1)”, not “Eq. (1)” or “equation (1)”, except at the beginning of a sentence: “Equation (1) is . . .”

3. Other Recommendations (Heading Level-1)

There are some indications about other recommendations.

3.1 Abbreviations and Acronyms (Heading Level-2)

Define abbreviations and acronyms the first time they are used in the text, even after they have already been defined in the abstract. Abbreviations such as IEEE, SI,

ac, and dc do not have to be defined. Abbreviations that incorporate periods should not have spaces: write “R.C.N.G.”, not “R. C. N. G.” Do not use abbreviations in the title unless they are unavoidable.

3.2 Lists (Heading Level-2)

Lists may be either numbered or bulleted. Below you see examples of both.

1.	The first entry in this list

2.	The second entry

2.1.	A subentry

3.	The last entry

•	A bulleted list item

•	Another one

4. ഉപസംഹാരം Conclusion (Heading Level-1)

Although a conclusion may review the main points of the paper, do not replicate the abstract as the conclusion. A conclusion might elaborate on the importance of the work, suggest applications and indicates advantages, limitations, and possible applications.

കൃതജ്ഞത(Acknowledgement)

Acknowledgments, if needed, should be inserted at the end of the paper, before the references, not as a footnote to the title. Use an unnumbered section heading for the Acknowledgments, similar to the References heading.

അവലംബം (References)

References in the text should be indicated by Arabic numerals in square brackets that run consecutively through the paper. Authors should ensure that all references are cited in the text and vice versa. The reference list should contain only literature references; other information (e.g. experimental details) should be placed either in the body of the text. Each reference should contain only one literature citation. See examples for journal articles [1], books [2], proceedings [3] and personal communications [4], shown in References below. List and number all references in 12-point Times, single-spaced, at the end of your paper. Authors must use square brackets style [] as the citation in text, and the references should be numbered in the text (in square brackets) in the order of appearance.

Lloret J., Tomás J., Garcia M., Cánovas A., “Hybrid Stochastic Approach for Wireless Sensors Self- Location in Indoor Environments”. Sensors. Vol. 9, Issue 5. Pp 3695-3712. May 2009.

Young, G. O., “Synthetic structure of industrial plastics”, in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.

Garcia M., Bri D., Boronat F. and Lloret J., “A new neighbor selection strategy for group-based wireless sensor networks”, The Fourth International Conference on Networking and Services (ICNS 2008). Gosier, Guadalupe, March 16-21, 2008.

Lloret, J., “Topologies”, Communications and Remote sensing Research Lab. Technical Report. Available at http://personales.gan.upv.es/jlloret/topologies.pdf

പകര്‍പ്പവകാശം (Copyright Disclaimer)

Copyright reserved by the author(s). This article is an open-access article.